The Easiest Hemming Method

This is seriously the easiest way to hem pants with a sewing machine - it allows you to keep the original hem, and the results are great!

 

As much as I enjoy sewing, I am not the best seamstress out there! Most of my projects are not related to clothes because I find you typically have to be more precise than with other projects. I usually avoid hemming things because you have to make sure all the measurements are perfect – you can notice a mistake on a hemming project pretty easily!

However, a few weeks ago my mom asked me if I could help her hem some of my dad’s pants for a pioneer trek that they would be going on with our church. Since the pants already had an existing hem, I decided to use this method that lets you preserve the existing hem. It’s the easiest way to hem if you ask me, and I finished all of this in less than an hour.

So, without further delay, here’s a quick tutorial on how to hem clothes and keep the existing hem!

Step One: 

easy-hemming-method (1 of 13)

Put on the pants (or dress/skirt) that you want to hem and fold it up to where you want the new length to be.

Step Two: 

Don't miss out!

Don’t miss our BEST posts, deals, and more!

You're almost there! Just enter your email below and you'll receive exclusive content, straight to your email. 

envelope
envelope

easy-hemming-method (3 of 13)

Once you’ve determined the length that you want your pants to be, use a long straight pin to pin right at the crease, as seen above. It’s essential to make sure you measure both legs – in my dad’s case, we had to shorten one pant leg a lot more than another!

Step Three: 

easy-hemming-method (5 of 13)

Fold the current hem down and replace the pin where you created the areas where the crease was created when you were determining the length .

Step Four: 

easy-hemming-method (6 of 13)

Then fold the pant leg back up until the original hem is just above the crease. Repin and add pins all the way around.

Step Five: 

easy-hemming-method (7 of 13)

easy-hemming-method (8 of 13)

Using a zig zag stitch, sew all the way around the crease you pinned.

Step Six: 

easy-hemming-method (10 of 13)

Using sharp sewing scissors, carefully cut up to right below the zig zag stitch and then cut all the way around the pant leg (under the stitch) removing the excess material.

easy-hemming-method (11 of 13)

Step Seven:

easy-hemming-method (13 of 13)

Fold down the pants and then iron them. I obviously had not ironed the new hem at this point, but you definitely need to to make sure everything looks nice and crisp!

COMMENT POLICY:

All we ask is that you be kind. We welcome differing opinions, but any comments containing personal attacks, sarcasm, etc. will be removed immediately. Keyboard warriors aren’t welcome 🙂 All comments are moderated and may take time to be approved. Anything not pertaining specifically to the content of a post will be removed (including comments about ads).

 

Tags from the story
,

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.